Note: If you need any files please contact with us.
Power by USB port
Dimensions: 22 x 8 x 3cm
The usb self-check light, you can type the ” scroll” on the keyboard to activate it.
Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A-
Feed rate control: F+, F-
Jog rate: J+, J-
Spindle speed: speed up, slow down
Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point
Package Include:1 * Remote controller;1 * Cable
engraving machine parameters:
X, Y, Z Working Area: 600(Y)*390（X）*120(Z)mm
Outside dimension: 865*680*570mm（L*W*H）
Table size: 770（Y）*490（X）mm
Lathe structure: 6061/6063 Aluminium alloy
Max. Feeding height: ≤100mm
Drive unit:X axis—1605 Ball Screws;Y axis—1605 Ball Screws;Z axis—1204 Ball Screws
Sliding unit:X axis—High intensity Chrome plate shaft
Y axis—High intensity Chrome plate shaft
Z axis—High intensity Chrome plate shaft
Stepping motor: 57 two-phase 3A 150N.cm
Outside dimension: 65*158mm
Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket
VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD
Spindle motor: 1.5 KW Water Cooled
Spindle speed: 24000 rpm
Max working frequency: 400Hz
Principal axis collect: ER11collet, Standard configuration :6mm
Nut Model: ER11-A
Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM
Lubrication way: lubricated by high grease
Repeat accuracy: 0.05mm
Spindle precision: radial beat acuities 0.03mm
Carving Instructions: G code / TAB files / nc file / NCC files
- 1.This 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.It can work with various materials(metallic & non-metallic), such as: wood or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal, like aluminum, copper and silver to engrave them into 3D/2D works etc.
- 2.Spindle motor tips：1. The spindle motor must connect with the VFD.2. It cannot directly connect with the supply voltage (AC110V/220V).3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.Control box parameters: Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive;Computer connection: USB port;Command code: G code;Protection: Emergency stop button.
- 3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models,instrument panels, wooden products, etc.
- 4. The mini router Frame is movable. The machine can connect with computer as other external device such as printer, scanner; With the assist of the ROUTER 6040T, your design idea will be real-time display.
- 5. How to USE:1. Assembling and locating the machine on steady desk well.2. Make sure that your computer has a 25pin USB port output.3. Place the control box in a ventilated dry place where there is no dust,no moisture 5. Connecting the control box with the machine and you computer and make sure the plug will not come off.5. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise. It will damage the driver of the c